How To Reset The Radio In Your RAM 1500

How To Reset The Radio In Your RAM 1500

Quick Summary

Start with a soft reset, which restarts Uconnect without erasing anything: hold the volume and tune knobs on Uconnect 4 and 8.4 systems, or hold the power knob for 10 seconds or more on Uconnect 5. A factory reset in the settings menu clears paired phones and presets, so save it for stubborn problems. A battery disconnect is the last resort, and a truck whose screen keeps freezing after all three is a good candidate for a Phoenix vertical screen upgrade.

Somewhere around the third time your Ram's screen goes black in a parking lot with the A/C blasting and your phone still hunting for CarPlay, most owners start wondering how to reset Ram 1500 radio software without a dealer visit, and Uconnect will usually come back with a couple of knob presses.

We sell replacement screens for Ram trucks at Phoenix Automotive Inc., so our support line hears about frozen Uconnect units all year, and the steps below are sorted by generation because a 2016 truck and a 2023 truck don't reset the same way.

Identify Which Uconnect System Your Ram Has

The fourth-generation truck, built from 2009 to 2018 and sold as the Ram 1500 Classic after 2019, came with smaller radios or the 8.4-inch Uconnect screen, whereas the fifth-generation truck launched for 2019 got Uconnect 4 or 4C, with screens up to 12 inches.

For the 2022 model year, Ram moved its trucks to Uconnect 5, which resets a little differently (the Ram 1500 Classic stayed on Uconnect 4C), and your owner's manual will usually say which one you have.

Try A Soft Reset First

A soft reset restarts the radio without touching your phones, presets or settings, so try it first, with the truck in park and the ignition at run.

Uconnect 4, 4C And 8.4 Trucks

Hold the volume and tune knobs together for somewhere around 10 to 20 seconds until the screen goes dark, flashes the Ram logo and restarts, although some owners of 12-inch Uconnect 4C trucks report needing closer to 30 seconds.

Uconnect 5 Trucks

Uconnect 5 offers two ways, either holding the power knob for 10 seconds or more, or opening the Vehicle app, scrolling to Settings, choosing Reset and picking Soft Reset/Reboot, which restarts the radio and its connected devices.

Use A Factory Reset For Stubborn Problems

A factory reset is the heavier hammer, since it takes the system back to how it left the plant and wipes paired phones, presets, favorites and profiles along with it, so we'd hold it back for a glitch that survives a soft reset or for selling the truck.

On Uconnect 4 and 4C it sits under Settings and Reset, with a choice of restoring defaults or clearing personal data, and on Uconnect 5 you go into the Vehicle app, over to Settings and Reset, and pick Factory Reset, and afterward you'll want to delete the truck from your phone's Bluetooth and CarPlay lists and pair it fresh.

Disconnect The Battery As A Last Resort

If the screen ignores both the knobs and your finger, pulling power is the last thing to try, which means shutting the truck off, getting the key or fob out of the cab, and taking the negative cable off the 12-volt battery for 10 to 15 minutes or so before you put it back.

eTorque trucks carry a second 48-volt battery that you should leave completely alone, and the clock and presets will probably need setting again afterward.

Replace A Failing Uconnect With A Phoenix Screen

When a radio is freezing every week even with a factory reset and the latest software update behind it, the problem is usually tired hardware rather than a menu setting, and that's about where a direct-fit screen starts to beat another dealer visit.

For 2019 to 2024 trucks with the newer dash, our 13.6/14.5-inch Android 13/14 vertical screen for the 2019 to 2024 Ram and the 11.5-inch Android 13/14 vertical screen for the 2019 to 2024 Ram both support every trim and the factory 360 camera.

Owners of 2009 to 2018 trucks can look at the 12.1/13-inch Android 13/14 vertical screen for the 2009 to 2018 Ram, while the 9.7/10.4-inch unit for 2013 to 2018 and Ram 1500 Classic trucks is the one that covers the most model years, including the Classic.

Browse our vertical screen Android head units, or send our bilingual tech support team a photo of your dash and we'll help you sort out the right fit.

Frequently Asked Questions

Will a soft reset erase my phone or presets?

It won't, because all a soft reset does is reboot the radio, so your phones, presets and settings are still there afterward, and only a factory reset clears them.

How long should I hold the knobs for a soft reset?

Plan on 10 to 20 seconds holding the volume and tune knobs on Uconnect 4 and 8.4 trucks, or as long as 30 on a few 12-inch trucks, while Uconnect 5 wants the power knob held for 10 seconds or longer.

Why does my Ram radio keep freezing after a reset?

Usually it comes down to old software or hardware that's wearing out, so we'd look for a Uconnect software update before anything else, and a truck that still freezes after that is generally better off with a replacement head unit.

Do Phoenix screens fit the Ram 1500 Classic?

Our 9.7/10.4-inch Android 13/14 unit does, with the 2013 to 2018 Ram and the 2019 to 2024 Ram Classic both on its compatibility list.
Back to blog